Main functions and functions

1. Rolling molding technology, LLDPE material, strong and durable, the box can stand three or four adults, far from injection box

2. The embedded design of the temperature recorder can effectively prevent the risk of damage caused by collision with other hard objects in the convex part of the equipment, and the design is user-friendly

3. Temperature recorder is dustproof and waterproof: the incubator pre-cooling and cold chain transportation both have a humid environment, and the waterproof performance is not good, so the SIM card holder of the equipment will be damaged due to dampness for a long time.External flow card design, reserved SIM card slot

4, temperature recorder pluggable charging, don't have to drag box looked everywhere for power supply, Intelligent incubator with temperature recorder using ultra low power design, a charge can use seven days in a row, standby can be up to 30 days, compared to traditional incubator recorder save charge number 3-12 times a month, at the same time using embedded mobile phone SIM card and IP65 waterproof design, greatly reduce the risk of equipment damage of be affected with damp be affected with damp in the cold chain transportation.

5, equipped with ice card slot, in line with GSP requirements

6. The box is equipped with a high-performance ice storage board, which can be kept warm for more than 24 hours at room temperature of 35 degrees and for more than 72 hours at room temperature of 20 degrees.

Main technical parameters

General technical parameters
model	ONB8001
size	Lock body size: length width height：90mm×62mm×26mm
weight	about130g
Wireless mode of communication	4G/GPRS/SMS
Battery capacity	3000mAH
Battery life	about15天（Upload information points every 30 seconds）
Protection grade	IP65
Positioning way	GPS/Beidou + base station
GSM frequency	850/900/1800/1900MHZ
Relative humidity	≤90％
Use your time	≥10Thousands of hours
Sensor parameter
The temperature	-35°~+60°；±0.25°
humidity	0~100RH；精度±3.0%RH
The light intensity	Two high-sensitivity sensors
pressure	300~1100hPa (altitude -500 m ~9000 m);Accuracy: 0.06hpa (0.5m above sea level)
The acceleration	-16g~16g
Positioning way	GPS/Beidou+base station